We no longer sell products directly from the GHI Electronics website, click here for more details. Please find a Distributor to complete your online order. If you have any questions regarding this notice please contact us at support@ghielectronics.com.

You must be logged in to reply.

Page 1 of 1 out of 10 messages.

G80 TinyCLR OS firmware 0.5.0 upgrade

Posted 1mth ago
by PTSS | Newbie | 104 exp
Posted 1mth ago
by PTSS | Newbie | 104 exp
Ive had same issue trying to upgrade G80 to v4

Using TeraTerm to XModem up the firmware, it connects and starts sending file to G80 but stops at 5%
Have tried different Baud rates....
Always stops at 5% and goes no further.
Is there another way to upgrade?

Thanks
Reply #1 — Posted 1mth ago
by PTSS | Newbie | 104 exp
Reply #1 — Posted 1mth ago
by PTSS | Newbie | 104 exp
@PTSS -

If I use the TRANSFER / XMODEM / SEND, with the 1K Option set, then it appears to work!
Reply #2 — Posted 1mth ago
by Mike | Superhuman | 82,265 exp
Reply #2 — Posted 1mth ago
by Mike | Superhuman | 82,265 exp
PTSS says:

@PTSS -

If I use the TRANSFER / XMODEM / SEND, with the 1K Option set, then it appears to work!

1k option required.
Reply #3 — Posted 1mth ago
by przemoga | Newbie | 200 exp
Reply #3 — Posted 1mth ago
by przemoga | Newbie | 200 exp
Hi, I have updated G80 module with G80 Firmware.0.5.0.ghi file (teraterm) and now it introduces itself in device manager as G30. Have you faced with the same problem ?
Reply #4 — Posted 1mth ago (modified)
by valon.hoti@gmail.com | Junior | 616 exp
Reply #4 — Posted 1mth ago (modified)
by valon.hoti@gmail.com | Junior | 616 exp
Try to use U for upload instead X (1K selected)

I had same problem using X (1K selected) weeks earlier
Reply #5 — Posted 1mth ago
by Gus_ghielectroncs | Employee
Reply #5 — Posted 1mth ago
by Gus_ghielectroncs | Employee
przemoga says:
Hi, I have updated G80 module with G80 Firmware.0.5.0.ghi file (teraterm) and now it introduces itself in device manager as G30. Have you faced with the same problem ?

Windows will always show if the first device you plugged in when the driver was installed. You can ignore that.
Reply #6 — Posted 1mth ago
by Gus_ghielectroncs | Employee
Reply #6 — Posted 1mth ago
by Gus_ghielectroncs | Employee
valon.hoti@gmail.com says:

Try to use U for upload instead X (1K selected)

I had same problem using X (1K selected) weeks earlier

X command with GHI files
U commands with GLB files

Always, no exceptions Smiley
Reply #7 — Posted 1mth ago
by przemoga | Newbie | 200 exp
Reply #7 — Posted 1mth ago
by przemoga | Newbie | 200 exp
Ok, I will ignore it. Thanks Wink
Reply #8 — Posted 1mth ago
by valon.hoti@gmail.com | Junior | 616 exp
Reply #8 — Posted 1mth ago
by valon.hoti@gmail.com | Junior | 616 exp
@Gus_ghielectroncs - i'm still learning Smiley

Did exist any ready made desktop app for replacing tera term in simple way to upload files
Just with parameters to select and upload file .
Reply #9 — Posted 1mth ago
by Gus_ghielectroncs | Employee
Reply #9 — Posted 1mth ago
by Gus_ghielectroncs | Employee
@valon.hoti@gmail.com - we have always had that for netmf, and we will for TinyCLR in the future.

Even better, build this right into visual studio. Nothing else to install.

Page 1 of 1 out of 10 messages.

You must be logged in to reply.