We no longer sell products directly from the GHI Electronics website, click here for more details. Please find a Distributor to complete your online order. If you have any questions regarding this notice please contact us at support@ghielectronics.com.

You must be logged in to reply.

Page 1 of 4 out of 35 messages.

Introducing a breadboard-friendly line of NETMF offers!

10 likes
Posted 1yr ago (modified)
by Gary_ghielectroncs | Employee
Posted 1yr ago (modified)
by Gary_ghielectroncs | Employee
We understand that through-hole designs are still needed. We also know how valuable breadboard-friendly products can be. Today, we are announcing 4 new products for NETMF with a through-hole footprint!

Key design goals of these devices are:
  • Bread-board friendly.
  • Most signals from the core are exposed on 0.1" single row headers.
  • All signals are labeled right on the board, for easier connections.
  • Contains everything to run. Only requires a 3.3V power source, even if a USB cable is being used.
  • Includes the RTC crystal and circuitry.
  • Micro USB connection for easier prototyping but USB signals are still exposed.
  • GXP-compatible connections for devices with TFT display support.

Having the GXP-compatible connection allows for easier connections to displays. For example, the GXP Gadgeteer bridge can be used to connect any Gadgeteer display to any TH board with GXP connections.

Finally, the new TH line of products replaces all older HDR products. All current HDR products will continue to be offered until the end of 2015. We highly recommend the switch to the new TH product line. For those who bought the recent G30HDR, no need to worry this board will be continued to be software supported for the next several years as it is based on the G30 SoC.

NETMF product selector: https://www.ghielectronics.com/catalog/netmf
G30 TH: https://www.ghielectronics.com/catalog/product/551
G80 TH: https://www.ghielectronics.com/catalog/product/552
G120 TH: https://www.ghielectronics.com/catalog/product/553
G400 TH: https://www.ghielectronics.com/catalog/product/554
3 likes
Reply #1 — Posted 1yr ago
by Squeebee | Senior | 3,885 exp
Reply #1 — Posted 1yr ago
by Squeebee | Senior | 3,885 exp
Ooh very nice, now to see if I can hide this from the wife.
Reply #2 — Posted 1yr ago (modified)
by Gus_ghielectroncs | Employee
Reply #2 — Posted 1yr ago (modified)
by Gus_ghielectroncs | Employee
andre.m says:
is it planned to sell the G400TH alone without the SOM?

How did I know this is going to be the first question? Smiley no these come in pair unless you have a volume custom order.
Reply #3 — Posted 1yr ago
by Gary_ghielectroncs | Employee
Reply #3 — Posted 1yr ago
by Gary_ghielectroncs | Employee
andre.m says:
Gary has it intentionally omitted Cheesy
Look at the picture Mr. Andre... Cool
1 like
Reply #4 — Posted 1yr ago
by Sprigo | Hero | 12,912 exp
Reply #4 — Posted 1yr ago
by Sprigo | Hero | 12,912 exp
Squeebee says:
Ooh very nice, now to see if I can hide this from the wife.

Likewise @Squeebee. Thinking
Reply #5 — Posted 1yr ago
by Skewworks | Legend | 69,841 exp
Reply #5 — Posted 1yr ago
by Skewworks | Legend | 69,841 exp
Gus says:

andre.m says:
is it planned to sell the G400TH alone without the SOM?

How did I know this is going to be the first question? Smiley no these come in pair unless you have a volume custom order.

Define volume Smiley 10? 100? 1000?
Reply #6 — Posted 1yr ago
by Designer | King | 24,688 exp
Reply #6 — Posted 1yr ago
by Designer | King | 24,688 exp
No plans for a TH 120E ?
Reply #7 — Posted 1yr ago
by Brett | Superhuman | 125,590 exp
Reply #7 — Posted 1yr ago
by Brett | Superhuman | 125,590 exp
it's going to be a bit nit-picky I guess, but for the G30/80 it might have been a good idea to have half-moon castellations on the sides so you could potentially solder them down to another carrier PCB for more permanent installation. Quicker and easier than buying a raw chip and creating all the necessary circuitry around the board..... maybe for the 1.1 PCB? Smiley
Reply #8 — Posted 1yr ago
by Gus_ghielectroncs | Employee
Reply #8 — Posted 1yr ago
by Gus_ghielectroncs | Employee
@Brett - we had them on there but then they were removed. I can't tell you why just yet Wink
Reply #9 — Posted 1yr ago
by Brett | Superhuman | 125,590 exp
Reply #9 — Posted 1yr ago
by Brett | Superhuman | 125,590 exp
Gus says:
@Brett - we had them on there but then they were removed. I can't tell you why just yet Wink .

In that case, put them back until you can !

Page 1 of 4 out of 35 messages.

You must be logged in to reply.